New Advancements in the Abrasion Resistance of Internal Plastic Coatings
By A Mystery Man Writer
Description
For more than 60 years, internal plastic coatings have been used for corrosion protection on tubing, casing, line pipe and drill pipe. One of the historic concerns with the use of internal plastic coating is the threat of mechanical damage and subsequent corrosion cell generation. Through the earlier years of usage of internal plastic coatings, applicators relied solely on enhanced surface preparation and adhesion to ensure minimal exposure of the steel substrate if damage were to occur. Even with this minimization, the potential for corrosion was still a concern for some. Due to this, a focus on developing internal coatings that offered higher degrees of abrasion resistance was initiated. At this time, several materials have been developed that offer abrasion resistances up to twenty times greater than what had previously been seen. These abrasion resistant materials allow internal coatings to be used in applications that were previously filled with alloys and glass reinforced epoxy (GRE) liners. These applications include: production/injection wells that rely on frequent mechanical intervention, rod pumping wells, completion string systems and environments containing high amounts of entrained solids. This paper outlines the development of these products including the different chemistries used and their abrasion resistance, impact, laboratory evaluation of their abrasion resistance and initial case histories of applications where internal coatings have historically been excluded.
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://www.engineerlive.com/sites/engineerlive/files/IOG.0219.p.13-14%20-%20Pic%208.jpg)
Advances in abrasion resistance and mitigating corrosion
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://www.researchgate.net/publication/333154930/figure/fig2/AS:11431281117511409@1675466777788/Experimental-set-up-to-abrasive-wear-and-corrosion-tests-a-HDPE-pipeline-section-b_Q320.jpg)
PDF) Evaluation and implementation of High Density Polyethylene liner: Alternative of solution to corrosion-wear problems in flowlines
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://images.rodpub.com/images/254/171_350.jpg)
Waterborne Urethane-Acrylic Hybrid Resin Technology For High
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://d12oja0ew7x0i8.cloudfront.net/images/Article_Images/ImageForArticle_20999_16375980626106566.jpg)
Increasing Wear Resistance with Laser Heat Treatments
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://d12oja0ew7x0i8.cloudfront.net/images/Article_Images/ImageForArticle_20667_16282422394904551.jpg)
How to Ensure Your Taber Test Results are Reliable
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://i1.rgstatic.net/ii/profile.image/332021017661440-1456171387357_Q64/Miguel-Mateus-5.jpg)
PDF) Evaluation and implementation of High Density Polyethylene liner: Alternative of solution to corrosion-wear problems in flowlines
Coating Additives Market: Boosting Performance and Enhancing
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://ars.els-cdn.com/content/image/3-s2.0-B9780081011058000048-f04-05-9780081011058.jpg)
Downhole corrosion - ScienceDirect
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://i1.rgstatic.net/ii/profile.image/787737498091521-1564822663689_Q64/Till-Vallee.jpg)
Abrasion testing of organic corrosion protection coating systems with a rotating abrasive rubber wheel
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://www.engineerlive.com/sites/engineerlive/files/IOG.0219.p.13-14%20-%20Majorpack%20Overview.jpg)
Advances in abrasion resistance and mitigating corrosion
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://www.mdpi.com/ceramics/ceramics-06-00019/article_deploy/html/images/ceramics-06-00019-g001.png)
Ceramics, Free Full-Text
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://dst.gov.in/sites/default/files/ARCI-develops-scratch-resistant-protective-coatings.jpg)
ARCI develops scratch-resistant protective coatings for
![New Advancements in the Abrasion Resistance of Internal Plastic Coatings](https://www.coating-additives.com/en/markets/plastic-coatings/media/370569-desktop.jpg?rev=8c23856ebcfa0ce65dc02c65b0471d91)
Additives and resins for plastic coatings - Evonik Industries
from
per adult (price varies by group size)